€10 FREIGHT BONUS FOR ORDERS ABOVE €300 | UNTIL 24. MARCH

PRO XT RDM MAST EXTENSION

RDM extension with stainless steel pulley bottom
From €75.00 Regular Price €85.00
Incl. 19% VAT, excl. Shipping Cost
In stock

The GUNSAILS Pro XT extensions guarantee maximum durability and function. The stainless steel fittings are easy and intuitive to handle and indestructible in use. With the smooth-running wheels and the included Dyneema rope, the trim power of each sail will be reduced to a minimum. It doesn't matter how the trim block of your sail is mounted, with the Pro XT extensions the trimming always works without rope-crossing.

KEY FACTS:
> Anodised aluminium mast extension for all RDM masts
> Height adjustment by snap ring with hinge and rubber every 20 mm
> Solid stainless steel trim block with integrated pin hole, no deformation possible
> 2 easily running rolls incl. Dyneema rope, rope guide through axis
> Suitable for all sail brands, no matter how the trim pulley of your sail is aligned
> Metal push button for release
> Compatible with Classic Base, Kardan Base, Pro Base Pin, Tendon HD and all pin systems of other manufacturers

> Weight: 320: 670g / 480: 770g

TEST REPORTS

Test report Windsurf Mast Extension RDM review

SURF MAGAZIN JUNE-2023 // PRO XT MAST EXTENSION

GUNSAILS RDM EXTENSION IN ALU AND CARBON

The Pro XT RDM from GunSails is an attractive price-performance product in both versions. The solid stainless steel fitting with two smooth-running rollers decorates both the aluminum version and the nobly shimmering carbon tube.

The clever arrangement of the rollers with the large axle, through which the rope is threaded either from one side or the other, allows a clean rope guidance for sails with three rollers. And this is true for the roller block (as sewn on in the photo below right) as well as for GunSails - and for the variant rotated by 90 degrees in comparison.

The supplied soft, smooth Dyneema rope noticeably reduces friction and trimming forces, but - like all Dyneema ropes - also tends to pinch the fingers together when there is a lot of tension. A loop and the harness hook are a good choice for fine trimming. With just under 2.5 centimeters shortest length, the extension should fit most sails, the adjustment ring can be moved quickly and safely (unfold and twist slightly, then it goes from zero to 48 without stopping in between) and snaps into the holes independently.

The push button is quite small and tightly sprung, but sits elegantly and flush in the tube and is easy to operate.

The solid 32 aluminum extension weighs 652 grams, the 48 carbon sweetheart 552 grams. The aluminum extension costs 85 euros (32 cm) or 95 euros (48 cm). For 145 euros (32 cm) and 165 euros (48 cm) there's the counterpart as XT RDM Carbon. The solid ring with tension rubber engages every two centimeters, the shortest setting is 2.5 centimeters.

We found other products you might like!