NEOPRENE REPAIR KIT

M2 - NEOPRENE REPAIR KIT - HOT MELT PATCHES

The new M2 repair kit for tears and seams on laminated neoprene. It repairs your defective wetsuit reliably, quickly and permanently. Simply place the patch on the damaged area and iron it on with an iron. Done!

KEY FACTS:
> First aid for your damaged wetsuit
> Ideal for repairing tears and seams
> Easy to apply with an iron
> 2x large patches 10cm x 15cm
> 1x seam tape 2.5cm x 100cm

APPLICATION:
> Clean and dry the area to be repaired.
> Cut the patch to size.
> Heat the iron to a medium setting (without steam)
> Fix the patch in place with the tip of the iron.
> Iron the patch onto the neoprene with a little pressure and time (5-10 seconds).
> After the process, you should see a thin white sweat line all around the patch!

IMPORTANT NOTE:
The higher the temperature, the greater the pressure and the longer the application time, the better the bonding. On the other hand, there is also an increased risk of damaging the neoprene or causing discoloration on the iron. You can protect both by placing baking paper etc. or a thin damp cloth in between). The application does not work on smooth-skin neoprene! For larger holes, you can also fill the damaged area with M2 neoprene adhesive and then iron the patch over! It also makes sense to iron the patch on from both sides.